Pelton & Crane Validator 10 Sterilizer Refurbished

Pelton & Crane Validator 10 Autoclave is certified to proper operating specifications, refurbished, and includes 90 day warranty.

The Pelton & Crane Validator 10 Autoclave is a economical, light-capacity sterilizing unit designed to accommodate the needs of small medical, dental, and other practices requiring reliable and safe access to sterilization equipment.

Incorporated are a variety of safety and efficiency features, such as a door lock, which prevents the door from being opened while the chamber is pressurized. The Pelton and Crane Validator 10 Autoclave also features a set of microprocessor-controlled features to ensure effective and safe operation; a vent valve will automatically open if chamber pressure exceeds 242 kPa and the P-2 alarm will sound, and in case that fails, a secondary safety valve will open as a backup precaution should chamber pressure exceed 262 kPa. Similar functionality exists for heat and electrical levels, as well as a sensor to prevent chamber overfilling.

Pelton & Crane Validator 10 Autoclave Features:

- Efficiently and compactly designed – will fit on most countertops easily

- 4 automatic, preset sterilization controls, with optional an optional, programmable custom cycle setting

- Variable timed drying cycle, allowing user to set dry cycle based on load size

- Pressure-locking door design, preventing door from being opened while chamber is pressurized

- Vent and safety valves, ensuring over-pressurized chambers are vented safely

- Overheat protection – two independent heat-sensing mechanisms ensure internal temperature remains below 180° C

- Electrical power interruption sensor automatically vents chamber into the atmosphere in the case of power failure

- Chamber level sensor prevents chamber from being overfilled

Pelton & Crane Validator 10 Autoclave Specifications:

- Heating Time to 134c: 12minutes (hot start)

- Unwrapped Cycle Time: 16 minutes (hot start)

- External Dimensions: 14”H x 23 5/8”D x 19 1/4”W

- Internal Chamber Size: 9 7/8”dia x 17 1/2”deep (1340 cu. in.)

- Power Requirements: 120V, 50/60Hz

- Power Consumption: 1050W, 12 amps (requires dedicated 20 amp circuit)